What preparations should be made for spraying advertising logo paint
With the development of society, the requirements of customers in the advertising industry are becoming higher and higher. Nowadays, customers require advertisements to be resistant to wind, sun, rain, color, and so on. Ads that can meet these requirements require advance work. What are the specific requirements? I will inform you today.
Preparation work for spray advertising:
Top: Before spraying advertising paint, pre-treatment work is very important. Remove oil and dust, the surface of the object is greasy, and even the best paint will not stick.
Secondly, it is necessary to drain the water from the air compressor, otherwise it can easily penetrate into the paint and cause water droplets on the surface of the paint.
Thirdly, the spraying space should be kept clean and free of wax or fibers. These invisible things will also sink into the paint bucket and feedback to the exterior of the advertising film.
Fourth: When spraying, please follow strict quota allocation and do not cut corners. Some masters may cut back on the application, perhaps applying it thinner, resulting in dents or orange peel during spraying. In many cases, this is due to incorrect proportions.
Fifth: After the coating is prepared, it is necessary to use it within 2 hours, otherwise chemical reactions may occur and affect the final result.
Article origin: Advertising logo paint www.fsxg.com.cn
-
08-25
Common problems with automotive repair paint
Why are the orange lines on the surface of the varnish so heavy after each spray? Why on earth? How can we prevent a decrease?Answer: The thinness of the varnish, the amount of paint produced by the s
-
06-05
The car repair paint manufacturer told you about the problem with water-based coatings
1. How long does it take for a skilled paint coating technician to master the operation of water paint?Generally, practice and understanding with less than half a sound can be mastered, and proficienc
-
05-31
Qingyuan Automobile Repair Paint Company tells you the steps for painting
Automotive Painting Process(1) Rust prevention and internal painting of the vehicle body: Depending on the condition of the vehicle body, it will be completed by a sheet metal worker.(2) Polishing and
-
05-12
Why does car repair paint lack luster?
If there is a lack of gloss on the surface of the originally flat and smooth car paint surface, especially during the process of car paint care, it can be observed under a microscope that the surface